– Mayer & Cie. is back. The future of the brand has been secured, and the company is returning to the market with renewed strength, a clear focus on customer needs, and a strong commitment to reliability.
Germany, April 16, 2026 – The future of the Mayer & Cie. brand has been secured: Following the successful completion of the purchase agreement for assets in the circular knitting machinery segment of the German traditional company Mayer & Cie., which was signed in February this year, the brand will continue to exist. The transfer of these assets to the new owner, Xu Hongjie, was formally completed yesterday afternoon. This clears the way for the resumption of business operations at the Albstadt site.
Keep your MBF 3.2‘s strong points while expanding the range of possibilites to today‘s
demand in 3-thread fleece fabric.
TECHNICAL INFORMATION:
New VersionDiameter [inch]: 26″ – 48″Machine gauges [E]: 14 – 60No. of feeders: 96 at 30″Speed up to [rpm]: 25 rpm at 30″Speed factor (SF): 990
Unparalleled output for fine rib structures, made on circular knitting machines that are bestsellers in their own right. Available for OV 3.2 series and D4 3.2 series.
TECHNICAL INFORMATION:
Diameter [inch]: 30″ – 36 Machine gauges [E]: 28 – 32
No. of feeders: 108 at 34″
Speed up to [rpm]: 34 rpm at 34″
Speed factor (SF): 1156
Under a new partnership agreement between TotalEnergies Lubrifiants and Mayer & Cie. signed, the Tixo Stainless co-branded product range will be sold by Mayer & Cie.’s expert distributors worldwide to their customers
Kerem Ögretmen from Mayer Mümessillik on anticipating customer demands and in a second-generation family business
Our new MDS 1 plus design software is now availabe for all Mayer & Cie. jacquard machines – either as an upgrade to the software‘s previous version MDS 1 or as a feature of a newly ordered Mayer & Cie. machine.
TECHNICAL INFORMATION:Diameter [inch]: 30″, 32″ 34″″
Machine gauges [E]: 20, 22. 24, 28, 32
No. of feeders:132 at 30″
Speed up to [rpm]: 36 rpm at 30″
Speed factor (SF): 1080
Increase machine output for elastomeric plating knitted fabrics by up to 30 percent. Compatible with the following machine types: D4-3.2, D4-3.2 II, OV 3.2 QC, OV 3.2 Qce, OV 3.2
TECHNICAL INFORMATION:Diameter [inch]: 26″ – 48″Machine gauges [E]: 18 – 32No. of feeders:96 at 30″Speed up to [rpm]: 50 rpm at 30″Speed factor (SF): 1500
Technical informations:
Braid pattern: 2-over-2
rpm of rotor 1/min>´
Bobbin Standard:
Wire: 225 rpm, Yarn 265 rpm
Bobbin long: Yarn 245 rpm
Bobbin extra long: Yarn 200 rpm
rpm of carrier 1/min
Bobbin Standard:
Wire 19 rpm; Yarn 22 rpm
Bobbin long: Yarn: 20 rpm
Bobbin extra long: Yarn 17 rpm
Technical informations:
Braid pattern: 2-over-2
rpm of rotor 1/min
Bobbin Standard:
Wire: 225 rpm, Yarn 265 rpm
Bobbin long: Yarn 245 rpm
Bobbin extra long: Yarn 200 rpm
rpm of carrier 1/min
Bobbin Standard:
Wire 19 rpm; Yarn 22 rpm
Bobbin long: Yarn: 20 rpm
Bobbin extra long: Yarn 17 rpm
Technical informations:
Braid pattern: 2-over-2
rpm of rotor 1/min
Bobbin Standard:
Wire: 225 rpm, Yarn 265 rpm
Bobbin long: Yarn 245 rpm
Bobbin extra long: Yarn 200 rpm
rpm of carrier 1/min
Bobbin Standard:
Wire 19 rpm; Yarn 22 rpm
Bobbin long: Yarn: 20 rpm
Bobbin extra long: Yarn 17 rpm
Technical informations:
Braid pattern: 3-over-3
rpm of rotor 1/min
Bobbin Standard:
Wire: 225 rpm, Yarn 265 rpm
Bobbin long: Yarn 245 rpm
Bobbin extra long: Yarn 200 rpm
rpm of carrier 1/min
Bobbin Standard:
Wire 28 rpm; Yarn 33 rpm
Bobbin long: Yarn: 31 rpm
Bobbin extra long: Yarn 25 rpm
Technical informations:
Braid pattern: 3-over-3
rpm of rotor 1/min
Bobbin Standard:
Wire: 225 rpm, Yarn 265 rpm
Bobbin long: Yarn 245 rpm
Bobbin extra long: Yarn 200 rpm
rpm of carrier 1/min
Bobbin Standard:
Wire 28 rpm; Yarn 33 rpm
Bobbin long: Yarn: 31 rpm
Bobbin extra long: Yarn 25 rpm
Technical informations:
Braid pattern: 3-over-3
rpm of rotor 1/min
Bobbin Standard:
Wire: 225 rpm, Yarn 265 rpm
Bobbin long: Yarn 245 rpm
Bobbin extra long: Yarn 200 rpm
rpm of carrier 1/min
Bobbin Standard:
Wire 38 rpm; Yarn 44 rpm
Bobbin long: Yarn: 41 rpm
Bobbin extra long: Yarn 33 rpm
The entire range of patterns in one piece of software – for all electronic Mayer & Cie. circular knitting machines
Mayer & Cie. knithawk identifies imperfections such as spot defects, vertical defects, horizontal defects and defects in elastomeric plating in single jersey structures.
Increase machine output for elastomeric plating knitted fabrics by up to 20 percent. Compatible with the following machine types: S4-3.2 II
Existing machines can be equipped with Senso Blue RS, Mayer & Cie.‘s machine-integrated
lubrication and needle oil recycling system.
For best results combine the special take down with our plaiting device (see reverse).
knitlink is the web-based customer and machine portal from Mayer & Cie. It is the hub for all information and services relating to circular knitting machines. Currently, knitlink has three components: my.monitoring, my.store and my.services.
Control 5.0 is the new machine control system for Mayer & Cie. machines. It is a prerequisite for the use of any of the knitlink applications. From 2024, it will be installed as standard in all circular knitting machines. For machines built in 2001 or later, Control 5.0 is available as an upgrade, either in the standard version as SmartControl or as ClassicControl.
Make your single jersey star fit for producing 3-tread fleece..
TECHNICAL INFORMATION:Diameter [inch]: 30″ – 34″Machine gauges [E]: 14 – 18No. of feeders: 48 at 38″Speed up to [rpm]: 20 rpm at 38″Speed factor (SF): 600
TECHNICAL INFORMATION:Diameter [inch]: 30″ – 42″Machine gauges [E]: 14 – 28No. of feeders: 48 at 30″Speed up to [rpm]: 23 rpm at 30″Speed factor (SF): 690
TECHNICAL INFORMATION:Diameter [inch]: 30 – 34″Machine gauges [E]: 20 – 24No. of feeders: 96 at 30″Speed up to [rpm]: 33 rpm at 30″Speed factor (SF): 990
Horizontal lay-in yarn guide
Improved holding down function for less repositioning of horizontal yarn guide.
Control 5.0.
New, state-of-the-art machine control.
Required for using knitlink digital service cloud.
With the SpeedBooster Upgrade Kit, users can improve their existing braiding machines efficiency. This means increasing their value or maintaining it in the long term
The friction wheel is an alternative take-off unit in the braiding process
Meet today‘s demand in 3-thread fleece combined with single jersey structures.
Spare parts packages tailor-made for your circular knitting machines
Pre-defined spare parts packages for an even more planable production.
Now it‘s time to snap the offer: We currently offer exchange cam parts for the S4 3.2 II.
Automatic cutting and opening of the fabric tube – while knitting.
Compact and space-saving design right underneath the spreader..
More robust knitting performance-
Flexibility is the key to the knitting machine‘s extra sturdyness
Automatic cutting and opening of the fabric tube – while knitting.
Compact and space-saving design right underneath the spreader..
The machine control upgrade kit replaces the existing shaft drive system by the current system, which uses servomotors. It is compatible with all MR 11and MR 15 models with an
The machine control upgrade kit replaces the existing shaft drive system by the current system, which uses servomotors. It is compatible with all MR 11and MR 15 models with an
TECHNICAL INFORMATION:Diameter [inch]: 15″ – 36″Machine gauges [E]: 18 – 28 No. of feeders: 120 at 30″Speed up to [rpm]: 50 rpm at 30″Speed factor (SF): 1500
Plaiting the fabric with the Mayer & Cie. folding device combined with our swing box is sensible for tubular fabrics made of delicate or elastomeric yarns.
A good match: Folding device and special take down
Increase machine output for elastomeric plating knitted fabrics by up to 30 percent. Compatible with the following machine types: Relanit 3.2 II, Relanit 3.2 S and Relanit 3.2 HS
Increase your production by up to 20 percent depending on desired pattern and yarn!‘’
Blow clearing of fluff during knitting process
Particularly recommended for all spun yarns.
