High performance conversion kit for existing Relanit 3.2 machines.

Increase your machines' output - with elastomeric plating* - by up
to 30 percent.

New yarn guiding technology for higher productivity

The high performance upgrade is based on a new, updated yarn guide design that keeps
the elastomric yarn in the correct position.

Your benefits

Highest reliability with elastomeric plating at machines' maximum speed.

Increased production.

Fewer fluff spots thanks to the new yarn guide's design (air-through-hole).

Sustainable quality and capacity increase at low cost.

*Triple plating is not guaranteed.

Available for

Relanit 3.2 S »
Relanit 3.2 II »
Relanit 3.2 HS »

Your investment

With adjusting jig
30“ E26-32 EUR 2,600.00 Part-No. 10004772
32“ E26-32 EUR 2,700.00 Part-No. 10004727
34“ E26-32 EUR 2,900.00 Part-No. 10004744
30“ E18-24 EUR 2,600.00 Part-No. 10004724
32“ E18-24 EUR 2,700.00 Part-No. 10004765
34“ E18-24 EUR 2,900.00 Part-No. 10004751

Without adjusting jig
30“ E26-32 EUR 2,500.00 Part-No. 10004723
32“ E26-32 EUR 2,600.00 Part-No. 10004754
34“ E26-32 EUR 2,800.00 Part-No. 10004760
30“ E18-24 EUR 2,500.00 Part-No. 10004726
32“ E18-24 EUR 2,600.00 Part-No. 10004771
34“ E18-24 EUR 2,800.00 Part-No. 10004766

Prices are subject to change.

contact

Frank Stuhrmann
Technical Employee After Sales

Phone.: +49 (0)7432 700-0
spareparts(at)mayercie.com