Search
Close this search box.
Search
Close this search box.
Search
Close this search box.

High Speed Upgrade for your Relanit 3.2 Machines

Increase your machines' output - with elastomeric plating - by up
to 30 percent.

New yarn guiding technology for higher productivity

The high speed upgrade ist based on a new, updated yarn guide design that keeps the elastomric yarn in the correct position.

Your benefits

Highest reliability with elastomeric plating at machines' maximum speed.

Increased production.

Fewer fluff spots thanks to the new yarn guide's design (air-through-hole).

Sustainable quality and capacity increase at low cost.

*Eine Dreifachplattierung wird nicht garantiert

Available for

Your investment

With adjusting jig 30“ E26-32 EUR 2.600.-- Part-No. 1004772
32“ E26-32 EUR 2.700,-- Part-No. 1004727
34“ E26-32 EUR 2.900,-- Part-No. 1004744
30“ E18-24 EUR 2.600.-- Part-No. 1004724
32“ E18-24 EUR 2.700,-- Part-No. 1004765
34“ E18-24 EUR 2.900,-- Part-No. 1004751

​Without adjusting jig
30“ E26-32 EUR 2.500.-- Part-No. 1004723
32“ E26-32 EUR 2.600,-- Part-No. 1004754
34“ E26-32 EUR 2.800,-- Part-No. 1004760
30“ E18-24 EUR 2.500.-- Part-No. 1004726
32“ E18-24 EUR 2.600,-- Part-No. 1004771
34“ E18-24 EUR 2.800,-- Part-No. 1004766

contact

Address
Mayer & Cie. GmbH & Co. KG Emil-Mayer-Strasse 10 D-72461 Albstadt Postbox: Postfach 201580 D-72438 Albstadt Tel. +49 (0)7432 700-0 Fax +49 (0)7432 700-362 info(at)Mayercie.com
Address
Mayer & Cie. GmbH & Co. KG Emil-Mayer-Strasse 10 D-72461 Albstadt Germany
general information
| © Mayer & Cie. | 2024 |